Hardwood Floor Recoating in Kansas City
Refresh the finish without the cost of a full refinish.
Refresh the finish without the cost of a full refinish.
When the finish on a floor is worn but the wood underneath is still sound, you often do not need a full refinish. Recoating, also called screen-and-recoat, lightly buffs the existing finish to give the new coat something to grab, then lays a fresh protective layer over the top. It erases light scratches and surface dullness, renews the protection on high-traffic areas, and costs a fraction of sanding back to bare wood. Caught in time, a recoat every few years keeps your floor ahead of the wear and pushes a full refinish years down the road.
Before After Drag to compare before & after
What You Get With Recoating
Screen and buff
We abrade the existing finish so the new coat bonds properly instead of peeling later.
Fresh protective coat
A new finish layer renews protection and erases light surface scratches and dullness.
No full sand needed
Because we do not sand to bare wood, recoating is quicker, cleaner, and cheaper than a full refinish.
Honest assessment first
We check that the existing finish is sound. If the wear is too deep, we will tell you a refinish is the better call.
Hardwood Floor Recoating by City
We bring recoating to homes across the Kansas City metro. Choose your city for local details.
Recoating is the cheapest way to extend the life of a floor, but only when it is done before the wear reaches the bare wood. Stay on a recoat schedule and you protect the floor and delay the much larger cost of a full refinish.
Hardwood Floor Recoating: Common Questions
Recoating buffs the existing finish and adds a fresh coat on top without sanding to bare wood. Refinishing sands the floor down and rebuilds the stain and finish. Recoating is cheaper and faster, but it only works when the finish is still sound.
When the finish is worn or dull but there are no deep scratches into the wood and no bare spots. If the damage has reached the wood or there are stains, a full refinish is the right move instead.
Light foot traffic is usually fine within a day. We recommend waiting a few days before heavy furniture and rugs so the finish cures fully.
Related Services
Hardwood Floor Refinishing
Sanding, staining, and re-coating that erases scratches, dents, and dullness without the cost of replacement.
Hardwood Floor Restoration
Deep cleaning, re-coating, and full restoration for floors that have gone too long between maintenance.
Dustless Hardwood Floor Refinishing
Vacuum-assisted sanding that captures the dust at the source so your home stays clean while your floors get restored.
What Kansas City Homeowners Say
Straight from our customers across the Kansas City metro.
"Nick was great to work with. He sanded our floor, helped us pick a new finish and sheen, and finished the floor in the allotted time. It is absolutely beautiful. Our painter was so impressed with Nick's work that he asked for his contact information so he could refer some of his clients. All around very happy."
"I am so thrilled with my new floors and staircase. My old stairs were a trip hazard. Nick and his crew were amazing to install new oak treads and risers. They also installed a new oak floor at a very reasonable cost for me."
"Nick and his crew did an excellent job refinishing old and installing new hardwood floors in my home in Platte Brook. He is very knowledgeable and very easy to work with, and his crew shares the same traits."
Guides Worth Reading
Straight answers from the crew, no sales pitch.
Hardwood Floors in Shawnee and Lenexa: What Gets Repaired, What Gets Refinished and What Gets Replaced
Shawnee and Lenexa both run old to new from east to west, and the right repair depends on which end of town the floor is in. A stained board in a 1960s ranch and a stained board in a 2010s build are two different jobs.
Read the guide →Hardwood Floor Scratch Repair: Which Scratches Buff Out, Which Need a Recoat, and Which Need Sanding
Whether a scratch is a five-minute fix or a room-sized job comes down to one thing: is it in the finish or in the wood? Here is how to tell, and what each answer means.
Read the guide →Cleaning Hardwood Floors in Kansas City Without Wrecking the Finish
Most floors that look dirty are not dirty. The finish on top of them has worn thin, and no cleaner made will fix that.
Read the guide →Ready for Hardwood Floor Recoating?
Get a free, no-pressure estimate from Kansas City’s trusted hardwood team.